Sea-water effects on foam-cored composite sandwich lay-upsXIAOMING LI; WEITSMAN, Y. Jack.Composites. Part B, Engineering. 2004, Vol 35, Num 6-8, pp 451-459, issn 1359-8368, 9 p.Article

Response of sandwich composites with nanophased cores under flexural loadingMAHFUZ, Hassan; ISLAM, Muhammad S; RANGARI, Vijaya K et al.Composites. Part B, Engineering. 2004, Vol 35, Num 6-8, pp 543-550, issn 1359-8368, 8 p.Article

The use of full-field measurement methods in composite material characterization: interest and limitationsGREDIAC, Michel.Composites. Part A, Applied science and manufacturing. 2004, Vol 35, Num 7-8, pp 751-761, issn 1359-835X, 11 p.Conference Paper

Elastic waves in multiferroic cylinders of sectorial cross-sectionYUNYING ZHOU; WEIQIU CHEN; CHAOFENG LÜ et al.Composites. Part B, Engineering. 2012, Vol 43, Num 8, pp 3001-3008, issn 1359-8368, 8 p.Article

Sublaminate-based lamination theory and symmetry properties of textile composite laminatesLUO, Jyi-Jiin; DANIEL, Isaac M.Composites. Part B, Engineering. 2004, Vol 35, Num 6-8, pp 483-496, issn 1359-8368, 14 p.Article

Analytical solution for bending of moderately thick radially functionally graded sector plates with general boundary conditions using multi-term extended Kantorovich methodMOUSAVI, S. M; TAHANI, M.Composites. Part B, Engineering. 2012, Vol 43, Num 3, pp 1405-1416, issn 1359-8368, 12 p.Article

Carbon nanotube-reinforced aluminium stripsESAWI, Amal M. K; EL BORADY, Mostafa A.Composites science and technology. 2008, Vol 68, Num 2, pp 486-492, issn 0266-3538, 7 p.Article

Comparative analysis and critical issues of the main constitutive laws for concrete elements confined with FRPMONTUORI, Rosario; PILUSO, Vincenzo; TISI, Aldo et al.Composites. Part B, Engineering. 2012, Vol 43, Num 8, pp 3219-3230, issn 1359-8368, 12 p.Article

Normalisation of biaxial bias extension test results considering shear tension couplingHARRISON, Philip.Composites. Part A, Applied science and manufacturing. 2012, Vol 43, Num 9, pp 1546-1554, issn 1359-835X, 9 p.Article

Strategies for the assessment of nanocomposite mechanical propertiesQUARESIMIN, Marino; SALVIATO, Marco; ZAPPALORTO, Michele et al.Composites. Part B, Engineering. 2012, Vol 43, Num 5, pp 2290-2297, issn 1359-8368, 8 p.Article

Isoclinic versus arbitrary rotated intermediate configuration for gradient plasticity applicationsBROESE, C; SFYRIS, D; TSAKMAKIS, Ch et al.Composites. Part B, Engineering. 2012, Vol 43, Num 6, pp 2633-2645, issn 1359-8368, 13 p.Article

Investigation of structure and mechanical properties of multi-layered Al/Cu composite produced by accumulative roll bonding (ARB) processEIZADJOU, M; KAZEMI TALACHI, A; DANESH MANESH, H et al.Composites science and technology. 2008, Vol 68, Num 9, pp 2003-2009, issn 0266-3538, 7 p.Article

Mechanical characterization of lightweight polymer mortar modified with cork granulatesNOVOA, P. J. R. O; RIBEIRO, M. C. S; FERREIRA, A. J. M et al.Composites science and technology. 2004, Vol 64, Num 13-14, pp 2197-2205, issn 0266-3538, 9 p.Article

Estimates of the Vigdergauz constants for regular triangular honeycombsLUKKASSENA, Dag; MAUSETH, Guy B; MEIDELL, Annette et al.Composites. Part B, Engineering. 2012, Vol 43, Num 2, pp 375-380, issn 1359-8368, 6 p.Article

Effects of the dispersion of polymer wrapped two neighbouring single walled carbon nanotubes (SWNTs) on nanoengineering load transferYANCHENG ZHANG; JUNHUA ZHAO; NING WEI et al.Composites. Part B, Engineering. 2013, Vol 45, Num 1, pp 1714-1721, issn 1359-8368, 8 p.Article

Frequency estimate and adjustment of composite beams with small periodicityHE, Wen-Ming; CHEN, Wei-Qiu; HUA QIAO et al.Composites. Part B, Engineering. 2013, Vol 45, Num 1, pp 742-747, issn 1359-8368, 6 p.Article

Frictional behaviour of high performance fibrous tows: Friction experimentsCORNELISSEN, B; RIETMAN, B; AKKERMAN, R et al.Composites. Part A, Applied science and manufacturing. 2013, Vol 44, pp 95-104, issn 1359-835X, 10 p.Article

The effect of fiber properties on high performance alkali-activated slag/silica fume mortarsAYDIN, Serdar; BARADAN, Bülent.Composites. Part B, Engineering. 2013, Vol 45, Num 1, pp 63-69, issn 1359-8368, 7 p.Article

The effective thickness of laminated glass: Inconsistency of the formulation in a proposal of EN-standardsGALUPPI, Laura; ROYER-CARFAGNI, Gianni.Composites. Part B, Engineering. 2013, Vol 55, pp 109-118, issn 1359-8368, 10 p.Article

An overview on the cellulose based conducting compositesKUMAR PANDEY, Jitendra; TAKAGI, Hitoshi; NORIO NAKAGAITO, Antonio et al.Composites. Part B, Engineering. 2012, Vol 43, Num 7, pp 2822-2826, issn 1359-8368, 5 p.Article

Flexural properties of macadamia nutshell particle reinforced polyester compositesCHENSONG DONG; DAVIES, Ian J.Composites. Part B, Engineering. 2012, Vol 43, Num 7, pp 2751-2756, issn 1359-8368, 6 p.Article

Material characterization of glass/polypropylene composite bone plates according to the forming condition and performance evaluation under a simulated human body environmentPARK, Seok-Won; YOO, Seong-Hwan; AN, Song-Tao et al.Composites. Part B, Engineering. 2012, Vol 43, Num 3, pp 1101-1108, issn 1359-8368, 8 p.Article

Mechanical property evaluation of single-walled carbon nanotubes by finite element modelingXIAOXING LU; ZHONG HU.Composites. Part B, Engineering. 2012, Vol 43, Num 4, pp 1902-1913, issn 1359-8368, 12 p.Article

Non-linear buckling analysis of tapered curved composite plates based on a simplified methodologyAKHLAQUE-E-RASUL, Shaikh; GANESAN, Rajamohan.Composites. Part B, Engineering. 2012, Vol 43, Num 2, pp 797-804, issn 1359-8368, 8 p.Article

Study on graphene-oxide-based polyacrylamide composite hydrogelsJIANFENG SHEN; BO YAN; TIE LI et al.Composites. Part A, Applied science and manufacturing. 2012, Vol 43, Num 9, pp 1476-1481, issn 1359-835X, 6 p.Article